"""Provides methods to fetch and read the Obw measurement results."""
import functools
import nirfmxwcdma.attributes as attributes
import nirfmxwcdma.errors as errors
import nirfmxwcdma.internal._helper as _helper
def _raise_if_disposed(f):
"""From https://stackoverflow.com/questions/5929107/decorators-with-parameters."""
@functools.wraps(f)
def aux(*xs, **kws):
meas_obj = xs[0] # parameter 0 is 'self' which is the measurement object
if meas_obj._signal_obj.is_disposed:
raise Exception("Cannot access a disposed Wcdma signal configuration")
return f(*xs, **kws)
return aux
[docs]
class ObwResults(object):
"""Provides methods to fetch and read the Obw measurement results."""
def __init__(self, signal_obj):
"""Provides methods to fetch and read the Obw measurement results."""
self._signal_obj = signal_obj
self._session_function_lock = signal_obj._session_function_lock
self._interpreter = signal_obj._interpreter
[docs]
@_raise_if_disposed
def get_occupied_bandwidth(self, selector_string):
r"""Gets the bandwidth containing 99% of the total integrated power of the acquired signal around the center of the
carriers.
This value is expressed in Hz.
*OBW Results Occupied BW* = *OBW Results Stop Frequency* - *OBW Results Start Frequency*.
You do not need to use a selector string to read this result for the default signal and result instances. Refer
to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals and named results.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the bandwidth containing 99% of the total integrated power of the acquired signal around the center of the
carriers.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string, attributes.AttributeID.OBW_RESULTS_OCCUPIED_BANDWIDTH.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_absolute_power(self, selector_string):
r"""Gets the total integrated power of the acquired signal.
This value is expressed in dBm.
You do not need to use a selector string to read this result for the default signal and result instances. Refer
to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals and named results.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the total integrated power of the acquired signal.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string, attributes.AttributeID.OBW_RESULTS_ABSOLUTE_POWER.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_start_frequency(self, selector_string):
r"""Gets the start frequency of the :py:attr:`~nirfmxwcdma.attributes.AttributeID.OBW_RESULTS_OCCUPIED_BANDWIDTH`.
This value is expressed in Hz.
You do not need to use a selector string to read this result for the default signal and result instances. Refer
to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals and named results.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the start frequency of the :py:attr:`~nirfmxwcdma.attributes.AttributeID.OBW_RESULTS_OCCUPIED_BANDWIDTH`.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string, attributes.AttributeID.OBW_RESULTS_START_FREQUENCY.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_stop_frequency(self, selector_string):
r"""Gets the stop frequency of the :py:attr:`~nirfmxwcdma.attributes.AttributeID.OBW_RESULTS_OCCUPIED_BANDWIDTH`.
This value is expressed in Hz.
You do not need to use a selector string to read this result for the default signal and result instances. Refer
to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals and named results.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the stop frequency of the :py:attr:`~nirfmxwcdma.attributes.AttributeID.OBW_RESULTS_OCCUPIED_BANDWIDTH`.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string, attributes.AttributeID.OBW_RESULTS_STOP_FREQUENCY.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def fetch_measurement(self, selector_string, timeout):
r"""Fetches the absolute and relative powers of the carrier for the OBW measurement. The relative power is relative to the
total carrier power.
Args:
selector_string (string):
This parameter specifies a `Selector String
<https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ comprising of result
name.
Example:
"result::r1"
You can use the :py:meth:`build_result_string` method to build the selector string.
timeout (float):
This parameter specifies the time for which the method waits for the measurement to complete. This value is expressed
in seconds. A value of -1 specifies that the method waits until the measurement is complete. The default value is 10.
Returns:
Tuple (occupied_bandwidth, absolute_power, start_frequency, stop_frequency, error_code):
occupied_bandwidth (float):
This parameter returns the bandwidth containing 99% of the total integrated power of the acquired signal, around the
center of the
carriers.
absolute_power (float):
This parameter returns the carrier power integrated over a bandwidth of 5 MHz. This value is expressed in dBm.
start_frequency (float):
This parameter returns the start frequency of the **Occupied Bandwidth** parameter.
stop_frequency (float):
This parameter returns the stop frequency of the **Occupied Bandwidth** parameter.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
_helper.validate_not_none(selector_string, "selector_string")
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
occupied_bandwidth, absolute_power, start_frequency, stop_frequency, error_code = (
self._interpreter.obw_fetch_measurement(updated_selector_string, timeout)
)
finally:
self._session_function_lock.exit_read_lock()
return occupied_bandwidth, absolute_power, start_frequency, stop_frequency, error_code
[docs]
@_raise_if_disposed
def fetch_spectrum(self, selector_string, timeout, spectrum):
r"""Fetches the spectrum used for the OBW measurement.
Args:
selector_string (string):
This parameter specifies a `Selector String
<https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ comprising of result
name.
Example:
"result::r1"
You can use the :py:meth:`build_result_string` method to build the selector string.
timeout (float):
This parameter specifies the time for which the method waits for the measurement to complete. This value is expressed
in seconds. A value of -1 specifies that the method waits until the measurement is complete. The default value is 10.
spectrum (numpy.float32):
This parameter returns the averaged power at each frequency bin. The value is expressed in dBm.
Returns:
Tuple (x0, dx, error_code):
x0 (float):
This parameter returns the start frequency. This value is expressed in Hz.
dx (float):
This parameter returns the frequency bin spacing. This value is expressed in Hz.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
_helper.validate_not_none(selector_string, "selector_string")
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
x0, dx, error_code = self._interpreter.obw_fetch_spectrum(
updated_selector_string, timeout, spectrum
)
finally:
self._session_function_lock.exit_read_lock()
return x0, dx, error_code