"""Provides methods to configure the Sem measurement."""
import functools
import nirfmxwcdma.attributes as attributes
import nirfmxwcdma.enums as enums
import nirfmxwcdma.errors as errors
import nirfmxwcdma.internal._helper as _helper
def _raise_if_disposed(f):
"""From https://stackoverflow.com/questions/5929107/decorators-with-parameters."""
@functools.wraps(f)
def aux(*xs, **kws):
meas_obj = xs[0] # parameter 0 is 'self' which is the measurement object
if meas_obj._signal_obj.is_disposed:
raise Exception("Cannot access a disposed Wcdma signal configuration")
return f(*xs, **kws)
return aux
[docs]
class SemConfiguration(object):
"""Provides methods to configure the Sem measurement."""
def __init__(self, signal_obj):
"""Provides methods to configure the Sem measurement."""
self._signal_obj = signal_obj
self._session_function_lock = signal_obj._session_function_lock
self._interpreter = signal_obj._interpreter
[docs]
@_raise_if_disposed
def get_measurement_enabled(self, selector_string):
r"""Gets whether to enable the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (bool):
Specifies whether to enable the SEM measurement.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_MEASUREMENT_ENABLED.value
)
attr_val = bool(attr_val)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_measurement_enabled(self, selector_string, value):
r"""Sets whether to enable the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
value (bool):
Specifies whether to enable the SEM measurement.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SEM_MEASUREMENT_ENABLED.value,
int(value),
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_carrier_integration_bandwidth(self, selector_string):
r"""Gets the frequency range over which the measurement integrates the carrier power. This value is expressed in Hz.
Use "carrier<*n*>" as the selector string to read this attribute.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the frequency range over which the measurement integrates the carrier power. This value is expressed in Hz.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string,
attributes.AttributeID.SEM_CARRIER_INTEGRATION_BANDWIDTH.value,
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_number_of_offsets(self, selector_string):
r"""Gets the number of offset segments.
You do not need to use a selector string to read this result for default signal and result instance. Refer to
the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for information
about the string syntax for named signals and results.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Returns the number of offset segments.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_NUMBER_OF_OFFSETS.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_offset_start_frequency(self, selector_string):
r"""Gets the start frequency of the offset segment relative to the center frequency of the carrier(s). This value is
expressed in Hz.
Use "offset<*n*>" as the selector string to read this attribute.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the start frequency of the offset segment relative to the center frequency of the carrier(s). This value is
expressed in Hz.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string, attributes.AttributeID.SEM_OFFSET_START_FREQUENCY.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_offset_stop_frequency(self, selector_string):
r"""Gets the stop frequency of the offset segment relative to the center frequency of the carrier(s). This value is
expressed in Hz.
Use "offset<*n*>" as the selector string to read this attribute.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the stop frequency of the offset segment relative to the center frequency of the carrier(s). This value is
expressed in Hz.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string, attributes.AttributeID.SEM_OFFSET_STOP_FREQUENCY.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_offset_rbw_filter_bandwidth(self, selector_string):
r"""Gets the bandwidth of the RBW filter used to sweep the acquired offset segment. This value is expressed in Hz.
Use "offset<*n*>" as the selector string to read this attribute.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Returns the bandwidth of the RBW filter used to sweep the acquired offset segment. This value is expressed in Hz.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string,
attributes.AttributeID.SEM_OFFSET_RBW_FILTER_BANDWIDTH.value,
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_offset_rbw_filter_type(self, selector_string):
r"""Gets the shape of the digital RBW filter.
Use "offset<*n*>" as the selector string to read this attribute.
+---------------------+-----------------------------------------------------------------------+
| Name (Value) | Description |
+=====================+=======================================================================+
| FFT Based (0) | No RBW filtering is performed. |
+---------------------+-----------------------------------------------------------------------+
| Gaussian (1) | The RBW filter has a Gaussian response. |
+---------------------+-----------------------------------------------------------------------+
| Flat (2) | The RBW filter has a flat response. |
+---------------------+-----------------------------------------------------------------------+
| Synch Tuned - 4 (3) | The RBW filter has a response of a 4-pole synchronously tuned filter. |
+---------------------+-----------------------------------------------------------------------+
| Synch Tuned - 5 (4) | The RBW filter has a response of a 5-pole synchronously tuned filter. |
+---------------------+-----------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SemOffsetRbwFilterType):
Returns the shape of the digital RBW filter.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_OFFSET_RBW_FILTER_TYPE.value
)
attr_val = enums.SemOffsetRbwFilterType(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_offset_bandwidth_integral(self, selector_string):
r"""Gets the resolution of the spectrum to compare with spectral mask limits as an integer multiple of the RBW.
Use "offset<*n*>" as the selector string to read this attribute.
If this attribute returns a value greater than 1, the measurement acquires the spectrum with a narrow
resolution and then processes it digitally to get a wider resolution that is equal to the product of the bandwidth
integral and the RBW.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Returns the resolution of the spectrum to compare with spectral mask limits as an integer multiple of the RBW.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_OFFSET_BANDWIDTH_INTEGRAL.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def get_sweep_time_auto(self, selector_string):
r"""Gets whether the measurement computes the sweep time.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **True**.
+--------------+---------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+=======================================================================================+
| False (0) | The measurement uses the sweep time that you specify in the SEM Sweep Time attribute. |
+--------------+---------------------------------------------------------------------------------------+
| True (1) | The measurement uses a sweep time value of one slot duration. |
+--------------+---------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SemSweepTimeAuto):
Specifies whether the measurement computes the sweep time.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_SWEEP_TIME_AUTO.value
)
attr_val = enums.SemSweepTimeAuto(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_sweep_time_auto(self, selector_string, value):
r"""Sets whether the measurement computes the sweep time.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **True**.
+--------------+---------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+=======================================================================================+
| False (0) | The measurement uses the sweep time that you specify in the SEM Sweep Time attribute. |
+--------------+---------------------------------------------------------------------------------------+
| True (1) | The measurement uses a sweep time value of one slot duration. |
+--------------+---------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.SemSweepTimeAuto, int):
Specifies whether the measurement computes the sweep time.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.SemSweepTimeAuto else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_SWEEP_TIME_AUTO.value, value
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_sweep_time_interval(self, selector_string):
r"""Gets the sweep time when you set the :py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_SWEEP_TIME_AUTO` attribute
to **False**.
This value is expressed in seconds.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 666.66666700000007 microseconds.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (float):
Specifies the sweep time when you set the :py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_SWEEP_TIME_AUTO` attribute
to **False**.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_f64(
updated_selector_string, attributes.AttributeID.SEM_SWEEP_TIME_INTERVAL.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_sweep_time_interval(self, selector_string, value):
r"""Sets the sweep time when you set the :py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_SWEEP_TIME_AUTO` attribute
to **False**.
This value is expressed in seconds.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 666.66666700000007 microseconds.
Args:
selector_string (string):
Pass an empty string.
value (float):
Specifies the sweep time when you set the :py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_SWEEP_TIME_AUTO` attribute
to **False**.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_f64(
updated_selector_string, attributes.AttributeID.SEM_SWEEP_TIME_INTERVAL.value, value
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_averaging_enabled(self, selector_string):
r"""Gets whether to enable averaging for the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+==========================================================================================================================+
| False (0) | The measurement is performed on a single acquisition. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| True (1) | The SEM measurement uses the value of the SEM Averaging Count attribute as the number of acquisitions over which the |
| | SEM measurement is averaged. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SemAveragingEnabled):
Specifies whether to enable averaging for the SEM measurement.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_AVERAGING_ENABLED.value
)
attr_val = enums.SemAveragingEnabled(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_averaging_enabled(self, selector_string, value):
r"""Sets whether to enable averaging for the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+==========================================================================================================================+
| False (0) | The measurement is performed on a single acquisition. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| True (1) | The SEM measurement uses the value of the SEM Averaging Count attribute as the number of acquisitions over which the |
| | SEM measurement is averaged. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.SemAveragingEnabled, int):
Specifies whether to enable averaging for the SEM measurement.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.SemAveragingEnabled else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_AVERAGING_ENABLED.value, value
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_averaging_count(self, selector_string):
r"""Gets the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_AVERAGING_ENABLED` attribute to **True**.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 10.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Specifies the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_AVERAGING_ENABLED` attribute to **True**.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_AVERAGING_COUNT.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_averaging_count(self, selector_string, value):
r"""Sets the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_AVERAGING_ENABLED` attribute to **True**.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 10.
Args:
selector_string (string):
Pass an empty string.
value (int):
Specifies the number of acquisitions used for averaging when you set the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SEM_AVERAGING_ENABLED` attribute to **True**.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_AVERAGING_COUNT.value, value
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_averaging_type(self, selector_string):
r"""Gets the averaging type for averaging multiple spectrum acquisitions.
The averaged spectrum is used for the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **RMS**.
+--------------+-------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+=============================================================================================================+
| RMS (0) | The power spectrum is linearly averaged. RMS averaging reduces signal fluctuations but not the noise floor. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Log (1) | The power spectrum is averaged in a logarithmic scale. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Scalar (2) | The square root of the power spectrum is averaged. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Max (3) | The peak power in the spectrum at each frequency bin is retained from one acquisition to the next. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Min (4) | The lowest power in the spectrum at each frequency bin is retained from one acquisition to the next. |
+--------------+-------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SemAveragingType):
Specifies the averaging type for averaging multiple spectrum acquisitions.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_AVERAGING_TYPE.value
)
attr_val = enums.SemAveragingType(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_averaging_type(self, selector_string, value):
r"""Sets the averaging type for averaging multiple spectrum acquisitions.
The averaged spectrum is used for the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **RMS**.
+--------------+-------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+=============================================================================================================+
| RMS (0) | The power spectrum is linearly averaged. RMS averaging reduces signal fluctuations but not the noise floor. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Log (1) | The power spectrum is averaged in a logarithmic scale. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Scalar (2) | The square root of the power spectrum is averaged. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Max (3) | The peak power in the spectrum at each frequency bin is retained from one acquisition to the next. |
+--------------+-------------------------------------------------------------------------------------------------------------+
| Min (4) | The lowest power in the spectrum at each frequency bin is retained from one acquisition to the next. |
+--------------+-------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.SemAveragingType, int):
Specifies the averaging type for averaging multiple spectrum acquisitions.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.SemAveragingType else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_AVERAGING_TYPE.value, value
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_amplitude_correction_type(self, selector_string):
r"""Gets whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at
the RF center frequency, or at the individual frequency bins. Use the `RFmxInstr Configure External Attenuation
<rfmxinstrvi.chm/RFmxInstr_Configure_External_Attenuation_Table.html>`_ method to configure the external attenuation
table.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **RF Center Frequency**.
+----------------------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+============================+==========================================================================================================================+
| RF Center Frequency (0) | All the frequency bins in the spectrum are compensated with a single external attenuation value that corresponds to the |
| | RF center frequency. |
+----------------------------+--------------------------------------------------------------------------------------------------------------------------+
| Spectrum Frequency Bin (1) | An individual frequency bin in the spectrum is compensated with the external attenuation value corresponding to that |
| | frequency. |
+----------------------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SemAmplitudeCorrectionType):
Specifies whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at
the RF center frequency, or at the individual frequency bins. Use the `RFmxInstr Configure External Attenuation
<rfmxinstrvi.chm/RFmxInstr_Configure_External_Attenuation_Table.html>`_ method to configure the external attenuation
table.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_AMPLITUDE_CORRECTION_TYPE.value
)
attr_val = enums.SemAmplitudeCorrectionType(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_amplitude_correction_type(self, selector_string, value):
r"""Sets whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at
the RF center frequency, or at the individual frequency bins. Use the `RFmxInstr Configure External Attenuation
<rfmxinstrvi.chm/RFmxInstr_Configure_External_Attenuation_Table.html>`_ method to configure the external attenuation
table.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **RF Center Frequency**.
+----------------------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+============================+==========================================================================================================================+
| RF Center Frequency (0) | All the frequency bins in the spectrum are compensated with a single external attenuation value that corresponds to the |
| | RF center frequency. |
+----------------------------+--------------------------------------------------------------------------------------------------------------------------+
| Spectrum Frequency Bin (1) | An individual frequency bin in the spectrum is compensated with the external attenuation value corresponding to that |
| | frequency. |
+----------------------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.SemAmplitudeCorrectionType, int):
Specifies whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at
the RF center frequency, or at the individual frequency bins. Use the `RFmxInstr Configure External Attenuation
<rfmxinstrvi.chm/RFmxInstr_Configure_External_Attenuation_Table.html>`_ method to configure the external attenuation
table.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.SemAmplitudeCorrectionType else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SEM_AMPLITUDE_CORRECTION_TYPE.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_all_traces_enabled(self, selector_string):
r"""Gets whether to enable the traces to be stored and retrieved after performing the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (bool):
Specifies whether to enable the traces to be stored and retrieved after performing the SEM measurement.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_ALL_TRACES_ENABLED.value
)
attr_val = bool(attr_val)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_all_traces_enabled(self, selector_string, value):
r"""Sets whether to enable the traces to be stored and retrieved after performing the SEM measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
value (bool):
Specifies whether to enable the traces to be stored and retrieved after performing the SEM measurement.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SEM_ALL_TRACES_ENABLED.value,
int(value),
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_number_of_analysis_threads(self, selector_string):
r"""Gets the maximum number of threads used for parallelism for the SEM measurement.
The number of threads can range from 1 to the number of physical cores. The number of threads you set may not
be used in calculations. The actual number of threads used depends on the problem size, system resources, data
availability, and other considerations.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 1.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Specifies the maximum number of threads used for parallelism for the SEM measurement.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SEM_NUMBER_OF_ANALYSIS_THREADS.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_number_of_analysis_threads(self, selector_string, value):
r"""Sets the maximum number of threads used for parallelism for the SEM measurement.
The number of threads can range from 1 to the number of physical cores. The number of threads you set may not
be used in calculations. The actual number of threads used depends on the problem size, system resources, data
availability, and other considerations.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 1.
Args:
selector_string (string):
Pass an empty string.
value (int):
Specifies the maximum number of threads used for parallelism for the SEM measurement.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SEM_NUMBER_OF_ANALYSIS_THREADS.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code