"""Provides methods to configure the SlotPower measurement."""
import functools
import nirfmxwcdma.attributes as attributes
import nirfmxwcdma.enums as enums
import nirfmxwcdma.errors as errors
import nirfmxwcdma.internal._helper as _helper
def _raise_if_disposed(f):
"""From https://stackoverflow.com/questions/5929107/decorators-with-parameters."""
@functools.wraps(f)
def aux(*xs, **kws):
meas_obj = xs[0] # parameter 0 is 'self' which is the measurement object
if meas_obj._signal_obj.is_disposed:
raise Exception("Cannot access a disposed Wcdma signal configuration")
return f(*xs, **kws)
return aux
[docs]
class SlotPowerConfiguration(object):
"""Provides methods to configure the SlotPower measurement."""
def __init__(self, signal_obj):
"""Provides methods to configure the SlotPower measurement."""
self._signal_obj = signal_obj
self._session_function_lock = signal_obj._session_function_lock
self._interpreter = signal_obj._interpreter
[docs]
@_raise_if_disposed
def get_measurement_enabled(self, selector_string):
r"""Gets whether to enable the SlotPower measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (bool):
Specifies whether to enable the SlotPower measurement.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SLOTPOWER_MEASUREMENT_ENABLED.value
)
attr_val = bool(attr_val)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_measurement_enabled(self, selector_string, value):
r"""Sets whether to enable the SlotPower measurement.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is FALSE.
Args:
selector_string (string):
Pass an empty string.
value (bool):
Specifies whether to enable the SlotPower measurement.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SLOTPOWER_MEASUREMENT_ENABLED.value,
int(value),
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_synchronization_mode(self, selector_string):
r"""Gets whether the measurement is performed from the frame or slot boundary.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **Slot**.
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+==========================================================================================================================+
| Frame (0) | The frame boundary is detected, and the measurement is performed over the number of slots expressed by the SlotPower |
| | Measurement Length attribute starting at SlotPower Meas offset slots from the frame boundary. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Slot (1) | The slot boundary is detected, and the measurement is performed over the number of slots expressed by the SlotPower |
| | Measurement Length attribute starting at SlotPower Measurement Offset slots from the slot boundary. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SlotPowerSynchronizationMode):
Specifies whether the measurement is performed from the frame or slot boundary.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SLOTPOWER_SYNCHRONIZATION_MODE.value
)
attr_val = enums.SlotPowerSynchronizationMode(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_synchronization_mode(self, selector_string, value):
r"""Sets whether the measurement is performed from the frame or slot boundary.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **Slot**.
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Name (Value) | Description |
+==============+==========================================================================================================================+
| Frame (0) | The frame boundary is detected, and the measurement is performed over the number of slots expressed by the SlotPower |
| | Measurement Length attribute starting at SlotPower Meas offset slots from the frame boundary. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
| Slot (1) | The slot boundary is detected, and the measurement is performed over the number of slots expressed by the SlotPower |
| | Measurement Length attribute starting at SlotPower Measurement Offset slots from the slot boundary. |
+--------------+--------------------------------------------------------------------------------------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.SlotPowerSynchronizationMode, int):
Specifies whether the measurement is performed from the frame or slot boundary.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.SlotPowerSynchronizationMode else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SLOTPOWER_SYNCHRONIZATION_MODE.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_measurement_offset(self, selector_string):
r"""Gets the measurement offset to skip from the synchronization boundary. This value is expressed in slots. The
synchronization boundary is specified by the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SLOTPOWER_SYNCHRONIZATION_MODE` attribute.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 0. The valid values are any value greater than or equal to 0.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Specifies the measurement offset to skip from the synchronization boundary. This value is expressed in slots. The
synchronization boundary is specified by the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SLOTPOWER_SYNCHRONIZATION_MODE` attribute.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SLOTPOWER_MEASUREMENT_OFFSET.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_measurement_offset(self, selector_string, value):
r"""Sets the measurement offset to skip from the synchronization boundary. This value is expressed in slots. The
synchronization boundary is specified by the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SLOTPOWER_SYNCHRONIZATION_MODE` attribute.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 0. The valid values are any value greater than or equal to 0.
Args:
selector_string (string):
Pass an empty string.
value (int):
Specifies the measurement offset to skip from the synchronization boundary. This value is expressed in slots. The
synchronization boundary is specified by the
:py:attr:`~nirfmxwcdma.attributes.AttributeID.SLOTPOWER_SYNCHRONIZATION_MODE` attribute.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SLOTPOWER_MEASUREMENT_OFFSET.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_measurement_length(self, selector_string):
r"""Gets the duration of the SlotPower measurement. This value is expressed in slots.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 15. The valid values are any value greater than or equal to 1.
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (int):
Specifies the duration of the SlotPower measurement. This value is expressed in slots.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SLOTPOWER_MEASUREMENT_LENGTH.value
)
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_measurement_length(self, selector_string, value):
r"""Sets the duration of the SlotPower measurement. This value is expressed in slots.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is 15. The valid values are any value greater than or equal to 1.
Args:
selector_string (string):
Pass an empty string.
value (int):
Specifies the duration of the SlotPower measurement. This value is expressed in slots.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SLOTPOWER_MEASUREMENT_LENGTH.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_spectrum_inverted(self, selector_string):
r"""Gets whether the spectrum of the signal is inverted.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+-------------------------------+
| Name (Value) | Description |
+==============+===============================+
| False (0) | The spectrum is not inverted. |
+--------------+-------------------------------+
| True (1) | The spectrum is inverted. |
+--------------+-------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SlotPowerSpectrumInverted):
Specifies whether the spectrum of the signal is inverted.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SLOTPOWER_SPECTRUM_INVERTED.value
)
attr_val = enums.SlotPowerSpectrumInverted(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_spectrum_inverted(self, selector_string, value):
r"""Sets whether the spectrum of the signal is inverted.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+-------------------------------+
| Name (Value) | Description |
+==============+===============================+
| False (0) | The spectrum is not inverted. |
+--------------+-------------------------------+
| True (1) | The spectrum is inverted. |
+--------------+-------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.SlotPowerSpectrumInverted, int):
Specifies whether the spectrum of the signal is inverted.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.SlotPowerSpectrumInverted else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SLOTPOWER_SPECTRUM_INVERTED.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code
[docs]
@_raise_if_disposed
def get_rrc_filter_enabled(self, selector_string):
r"""Gets whether to enable the RRC filter.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+---------------------------------------------+
| Name (Value) | Description |
+==============+=============================================+
| False (0) | Disables the RRC filter in the measurement. |
+--------------+---------------------------------------------+
| True (1) | Enables the RRC filter in the measurement. |
+--------------+---------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
Returns:
Tuple (attr_val, error_code):
attr_val (enums.SlotPowerRrcFilterEnabled):
Specifies whether to enable the RRC filter.
error_code (int):
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
attr_val, error_code = self._interpreter.get_attribute_i32(
updated_selector_string, attributes.AttributeID.SLOTPOWER_RRC_FILTER_ENABLED.value
)
attr_val = enums.SlotPowerRrcFilterEnabled(attr_val)
except (KeyError, ValueError):
raise errors.DriverTooNewError() # type: ignore
finally:
self._session_function_lock.exit_read_lock()
return attr_val, error_code
[docs]
@_raise_if_disposed
def set_rrc_filter_enabled(self, selector_string, value):
r"""Sets whether to enable the RRC filter.
You do not need to use a selector string to configure or read this attribute for the default signal instance.
Refer to the `Selector String <https://www.ni.com/docs/en-US/bundle/rfmx/page/selector-strings-net.html>`_ topic for
information about the string syntax for named signals.
The default value is **False**.
+--------------+---------------------------------------------+
| Name (Value) | Description |
+==============+=============================================+
| False (0) | Disables the RRC filter in the measurement. |
+--------------+---------------------------------------------+
| True (1) | Enables the RRC filter in the measurement. |
+--------------+---------------------------------------------+
Args:
selector_string (string):
Pass an empty string.
value (enums.SlotPowerRrcFilterEnabled, int):
Specifies whether to enable the RRC filter.
Returns:
int:
Returns the status code of this method. The status code either indicates success or describes a warning condition.
"""
try:
self._session_function_lock.enter_read_lock()
updated_selector_string = _helper.validate_and_update_selector_string(
selector_string, self._signal_obj
)
value = value.value if type(value) is enums.SlotPowerRrcFilterEnabled else value
error_code = self._interpreter.set_attribute_i32(
updated_selector_string,
attributes.AttributeID.SLOTPOWER_RRC_FILTER_ENABLED.value,
value,
)
finally:
self._session_function_lock.exit_read_lock()
return error_code